 |
K0 Type Tungsten Carbide Drill Bits For Geological Prospecting And Coal Mining
Product Details:
| Place of Origin: | Zhuzhou,Hunan,China |
| Brand Name: | Gingte Li |
| Certification: | ISO9001:2015 |
| Model Number: | various |
Payment & Shipping Terms:
| Minimum Order Quantity: | 30KGs |
|---|---|
| Price: | negotiable |
| Packaging Details: | First paper packing each piece then pack into paper boxes or plastic box,next use exported cartons or wooden cases,or packed as customers'requirement. |
| Delivery Time: | 7-15 work days |
| Payment Terms: | T/T, Western Union, L/C |
| Supply Ability: | 400 tons/year |
|
Detail Information |
|||
| Material: | Contains 100% Original Tungsten And Cobalt | Size: | Various Grade And Size For Choose |
|---|---|---|---|
| Technology: | HIP Sinter | Shipping Terms: | FOB , CIF ,C&F Etc By Sea Or By Air |
| Hardness: | 88 HRA | Service: | 24-hour Online |
| Package: | Standard Export Package Or According Clients Required | Purpose: | For Mining Tools |
| High Light: | tungsten carbide parts,carbide button bits |
||
Product Description
K0 type tungsten carbide drill bits K40 customized for geological prospecting and coal mining
Advantages of Tungsten carbide drill bits:
1.High efficient in crushing
2.Low energy consumption
3.Long service life
4.Easy to replace
5.100% virgin raw material
6.Advance production equipment
7.With production experientce over 10 years
Application of drill bits:
1.Rock drilling
When drilling is started , it should be done with a little force with the air door slightly open and air door will be left wide open when the drill bit gets in 2-3 centimeters to increase the pressure for normal operations.The drill bits and the rods are to be replaced when they get in 1.5 meters of th shot holes .Normally 3 drilling rods are used with 3 drill bits replaced whe drilling highly friction rock formations.The diameter of the drill bits reduced 1-2mm successively. Deviations in the diameters of each group of drill bits should be minimized as much as possible,Drill bits with diameters differing much are to be used when the wear is signified . Each group of drill bits should get into the shot hole freely , since otherwise it will damage the inserts.
2.Repeated regrinding
What wear fastest is the edges of the outer peripheries of the drill bits during rock drilling operations,When the working edges are 5-6mm from the outer peripheriess with a blunted width up to 3-3.5mm, or when inverted cones occur in the working portions , the drill bits have to be repeatedly reground. The repeated regrinding of the drill bits should keep the original geometries and the are to be checked with templates.
The reground drill bits should also be kept in a compatible package and the diameter of the drill bits should be checked making bright colored marks on the bits, making it easy for choosing the bits when they are to be used .In drilling soft rock formations , one drill bit can be used repeatedly until it reaches a status of bluntness that requires regrinding,The blunted drill bits should be repaired in time in order to avoid the reduction of drilling and unreasonable wear of the carbide.
Grade Performances:
| Grade | Density | T.R.S | Hardness | Performance & Application Recommended |
| g/cm3 | MPα | HRA | ||
| YG8C | 14.7 | 2450 | 88.5 | Mostly used as the buttons of small and mediumsized percussion bits and as the inserts of rotary prospecting bits to cut soft and medium hard formations. |
| YG9C | 14.6 | 2450 | 87.8 | Suitable for super hard rock formation with excellent wear resistance. |
| YG10C | 14.4 | 2550 | 87 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations. |
| YG11C | 14.4 | 2600 | 87 | Suitable for soft, medium and hard rock formations, with high toughness. |
| YG13C | 14.2 | 2650 | 86.5 | Predominatly for the buttons of tricone bits and inserts of rotary percussion bits to cut hard and vey hard formations. |
| YG15C | 14 | 2700 | 86.5 | For oil cone drill bits, for medium soft and medium -hard rocks. |
Available Sizes and Different Shape mining inserts:
| Sr.No | Dimensions (mm) |
| 1 | 25*18*20 |
| 2 | 30*25*18 |
| 3 | 44*43*28*29 |
| 4 | 44*32.8*R5*26 |
| 5 | 46*45*28*28 |
| 6 | 46*45*30*29 |
| 7 | 47*32*45*26 |
| 8 | 47*45*26*32 |
| 9 | 50*20*35 |
| 10 | 54*25*15 |
| 11 | 75*23*45 |
| ........... | |
For any other sizes we are able to custom-made according to clients’ requirements or drawings.
Product Application Display:
Packing Process:
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 15-25 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.